Cisco Cisco Prisma II EDR Receiver Guida All'Installazione
Installing the Module in the Chassis
78-4025693-01 Rev D
17
4 In the Connect Using field, click the drop-down arrow and select the serial port
that you will use for the connection, and then click OK. The COM Properties
dialog box appears.
Note: For most applications, the serial port is COM1 or COM2.
Note: For most applications, the serial port is COM1 or COM2.
5 Set the following port setting in the COM Properties dialog box.
6 Click OK. The HyperTerminal main program window appears.
7 On the File menu, click Save to save the settings.
8 Wait for the ICIM boot to finish. Once finished, you should see the following
8 Wait for the ICIM boot to finish. Once finished, you should see the following
display:
---------------------
W A R N I N G