Cisco Cisco OptoStar II Driver Amplifier Guida All'Installazione

Pagina di 77
Care and Cleaning of Optical Connectors 
Cleaning of Optical Connector Overview 
Cleaning optical connectors can help prevent interconnect problems and maintain 
system performance. When optical connectors are disconnected or reconnected, 
the fiber surface can become dirty or scratched. The purpose of cleaning the 
optical connector is to remove all dusts and contaminants without leaving any 
residue. 
Recommended Equipment 
The following equipment is recommended to clean the mating surface of fiber 
connectors.
 
 
 
CLETOP or OPTIPOP ferrule cleaner (CLETOP Type A for SC connectors, and 
Type B for LC connectors) 
 
 
Compressed air (also called “canned air”)   
 
Lint-free wipes moistened with optical-grade (99%) isopropyl alcohol   
 
Bulkhead swabs for LC or SC connectors (choose the appropriate type)   
 
Optical connector scope 
Tips for Optimal Optical Connector Performance 
Follow the instructions below to ensure stable performance from optical 
connectors.
 
 
 
Do not connect or disconnect optical connectors with optical power present.   
 
Always use compressed air before cleaning the optical connectors.   
 
Always install end caps on connectors when they are not in use.   
 
Always use compressed air to clean the connector end caps.   
 
If you have any degraded signal problems, clean the optical connector.   
 
Advance a clean portion of the ferrule cleaner reel for each cleaning.   
 
Turn off optical power before making or breaking optical connections to avoid 
microscopic damage to fiber mating surfaces. 
 
 
Continued on next page 
 
 
2-8 
Installation 
OL-29668-02