Cisco Cisco OptoStar II 1310nm Transmitter Guida All'Installazione
Web Client Functions, Continued
In the SNMP Service interface:
•
Enable: The OptoStar II Web Client software allows access to the ICIM.
•
Disable: The OptoStar II Web Client software cannot access to the ICIM.
•
Click “save” to save.
Device community includes Index, Community, Permissions, Description and
Status.
Status.
•
Index: 1 - 10
•
Community: Users can change the community according to their own needs
•
Permission: Read-Write or Read-Only.
•
Description: Users can change the description according to their own needs
•
Status: select Enable to activate current community; select Disable to deactivate
current community.
current community.
•
Click “save” to save.
Trap status includes Index, Destination IP, Community and Status.
•
Index: 1 - 8
•
Destination IP: Users can change the destination IP according to their own
needs.
needs.
•
Community: Users can change the community according to their own needs.
•
Status: select Enable to send Trap; select Disable not to send Trap.
Note: It’s available to send Trap to at most 8 different addresses.
Note: It’s available to send Trap to at most 8 different addresses.
•
Click “save” to save.
Network Configuration
Click the Network Manager option in the Main Menu, the information display
interface will show the following interface:
interface will show the following interface:
•
Users can change the IP Address, Subnet Mask and Gateway according to their
own needs. Click “save” to save.
own needs. Click “save” to save.
Continued on next page
OL-29664-05
Operation
3-49