Cisco Cisco Smart CallConnector Server and Advanced Client Manuale Di Manutenzione
Configuring CallConnector Servers
Administrator’s Guide 6-7
Figure 6-2 Setup Routers and Servers Window
The Setup Routers & Servers section consists of four folders. The contents of these folders and
the parameters that can be configured in each window are summarized below.
Manage Cisco Routers: The Manage Cisco Routers folder contains a list of the configured
routers – Clicking on a router will open the tabbed pages for setting the parameters for
CallConnector Server to connect and work with that router. A new router can be configured by
clicking on the Add New Router button in the toolbar. The Setup Router pages include:
The Setup Routers & Servers section consists of four folders. The contents of these folders and
the parameters that can be configured in each window are summarized below.
Manage Cisco Routers: The Manage Cisco Routers folder contains a list of the configured
routers – Clicking on a router will open the tabbed pages for setting the parameters for
CallConnector Server to connect and work with that router. A new router can be configured by
clicking on the Add New Router button in the toolbar. The Setup Router pages include:
Page to enter the router access parameters and buttons to download the router phone
configurations and selecting the ephones for CallConnector.
Reviewing the details of the selected phones for connection to the CallConnector. The phone
configuration can be changed from this page.
Setting up the parameters for formatting phone numbers to be dialable and to be looked up in
the directory.
Display of the router hunt groups and options for changing the group configuration.
configurations and selecting the ephones for CallConnector.
Reviewing the details of the selected phones for connection to the CallConnector. The phone
configuration can be changed from this page.
Setting up the parameters for formatting phone numbers to be dialable and to be looked up in
the directory.
Display of the router hunt groups and options for changing the group configuration.
Setup Radius: Displays a page for configuring and verifying the radius settings on the routers.
The current radius configuration status is displayed for each router. Only parameters required to
setup radius is authentication key (password) and port (default =1646).
Diagnostic windows allow the administrator to verify transmission from the router and receipt at
the CallConnector Server of the radius messages.
Server Options: Allows the administrator to enable/disable the debug tracing and make
changes to the default IP address and port settings for the CallConnector Server applications.
Some CallControl options can also be set from this window.
Location Management: This page allows the administrator to add locations with area codes
and dialing patterns.
To save any changes made in the router configuration pages, you must press the
Save Router button.
Save Router button.
Note