Cisco Cisco Edge 340 Digital Media Player Guida All'Installazione

You can install the Cisco Edge 340 Series on a wall or a pillar, a metal pole, or a ceiling T-joint by using 
the wall-mount kit. You can also install the Cisco Edge 340 Series on almost any Video Electronics 
Standards Association (VESA)-compliant flat-panel display that is attached to a third-party VESA 
bracket. Besides, you can mount the Cisco Edge 340 Series on a desk or table vertically by using the 
desktop-mount bracket. 

Phillips screwdriver 

Scratch awl or other sharp-pointed object (wall-mount)

Electric drill with a 6-mm drill bit (wall-mount)

Crescent wrench or socket wrench

Pencil

Bubble level or laser level

Before installing the Cisco Edge 340 Series, verify that these guidelines are met:

Front clearance so that the LEDs can be seen.

AC power cord reaches from the AC power outlet to the rear-panel connector.

Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent 
lighting. Make sure that the cabling is safely away from other devices that might damage the cables.

Airflow around the Cisco Edge 340 Series is unrestricted.

Temperature around the unit does not exceed 45°C. 

Gigabit 
Ethernet

Off

No link.

Blue

Link up.

Blinking blue

Activity.

WiFi (AP 
and client)

Off

WiFi is disabled.

Solid blue

WiFi is enabled and functioning.

Blinking blue

WiFi is transmitting data.

Bluetooth

Off

Bluetooth is disabled.

Solid blue

Bluetooth is enabled and functioning.

Blinking blue

Bluetooth is transmitting data.

Storage

Off

Storage is not active.

Blinking blue

Storage is active.