Cisco Cisco Media Delivery Engine 1100 model

Follow the directions in the prompts. 

Restart the device when instructed. 

After restarting the device, the device mode should be correctly configured and you can run the 
Setup Wizard as normal. 

Any device-mode configurations should always be done manually. 

 describes the Cisco ECDS application supported on each Cisco ECDS platform and the 

recommended software version.

For best results, the following is recommended:

Use the most current version of the software. See 

 for recommendations per platform.

You should use the same software release across your deployment.

Generally, downgrade to a lower version is not required or necessary and can render your system 
unusable. 

Downgrade from Cisco ECDS Release 2.5.5 to an earlier release is not supported.

Cisco ECDS 2.5.5 is the current recommended version:

Supports WCCP/HTTPS

Applies to all Cisco ECDS platforms and can be used for device group upgrade with mixed 
platforms.

Supports the Cisco ECDS 2.5.5 rescue image if a device goes to a bad state and rescue is 
required.