Cisco Cisco IP Contact Center Release 4.6.1 Riferimenti tecnici
34
ICM Software Configuration
34
Configuration params
not used
Interruptible
Checked, indicates the script can be
interrupted.
Figure 9: ICM Network VRU Script List
4.9. Translation Route Configuration
Translation routes are supported on the Aastra ARS Gateway.
Configuration of translation routes is consistent to any other TDM switch.
Please refer to overall ICM documentation for more details.
Please note that the Translation Route Target DNIS values must be
Please note that the Translation Route Target DNIS values must be
configured in the Peripheral Monitor table as type VDN with configuration
param string ‗SCI_REQ‘.
Do not configure Dialed Numbers for Translation Route Target DNIS.
Do not configure Dialed Numbers for Translation Route Target DNIS.