Cisco Cisco E-Mail Manager Unity Integration Option Riferimenti tecnici
Peripheral Monitor Table
57
57
3.3. Peripheral Monitor Table
Unified ICM Peripheral Monitor table is used to configure stations for station
monitoring and VDNs that have Timed ACW values. A Peripheral Monitor table
VDN entry is used only to indicate any Timed ACW value as configured on the
switch. This Peripheral Monitor VDN entry does not replace a Peripheral Target
for VDN monitoring.
monitoring and VDNs that have Timed ACW values. A Peripheral Monitor table
VDN entry is used only to indicate any Timed ACW value as configured on the
switch. This Peripheral Monitor VDN entry does not replace a Peripheral Target
for VDN monitoring.
Note: VDNs must also be configured as Peripheral Targets in order to be
monitored for reporting.
You can configure the Peripheral Monitor Table by choosing Peripherals >
Peripheral Monitor within Configure ICM to display the Peripheral Monitor
table.
Peripheral Monitor within Configure ICM to display the Peripheral Monitor
table.
Click the Insert button to add records using the Peripheral Monitor
Configuration window.
Configuration window.
3.3.1. Monitoring Stations
The Peripheral Monitor table is used to specify which station, or range of
stations, should be monitored by the PG. Multiple peripheral monitor entries are
allowed. Set the Peripheral Monitor Type to Station. When specifying a single
station (e.g., 1100), use the Extension field. When specifying a range of stations
(e.g., 1100-1200), use the Param String field.
stations, should be monitored by the PG. Multiple peripheral monitor entries are
allowed. Set the Peripheral Monitor Type to Station. When specifying a single
station (e.g., 1100), use the Extension field. When specifying a range of stations
(e.g., 1100-1200), use the Param String field.
3.3.2. VDN Timed ACW Settings
VDNs that have a Timed ACW value on the Avaya should be added as a
Peripheral Monitor table entry with a Type of VDN. The Peripheral Monitor
Param Field should indicate the Timed ACW value, as shown in
Peripheral Monitor table entry with a Type of VDN. The Peripheral Monitor
Param Field should indicate the Timed ACW value, as shown in