Gigabyte GH-PCU31-VH Manuale Utente
- 9 -
GH-PCU31-VH
English
Figure 1
Disassemble the turn knob, bolt and fan speed controller
from the 3.5” front panel and reassemble these parts onto a
PCI rear panel in sequence.
Disassemble the turn knob, bolt and fan speed controller
from the 3.5” front panel and reassemble these parts onto a
PCI rear panel in sequence.
Figure 2
Place the PCI rear panel with the fan speed controller in the
selected PCI slot. Use screws to secure the PCI rear panel
in place.
Place the PCI rear panel with the fan speed controller in the
selected PCI slot. Use screws to secure the PCI rear panel
in place.
Figure 3
Connect the power cable of the power supply to the end of
the 4-pin connector cable provided. Then connect the 3-pin
power connector on the fan speed controller to the 3-pin
connector on the cooler.
Connect the power cable of the power supply to the end of
the 4-pin connector cable provided. Then connect the 3-pin
power connector on the fan speed controller to the 3-pin
connector on the cooler.
Figure 4
Installation is complete.
Installation is complete.
Power Installation and PCI Fan Speed Controller Installation
Figure 1
Figure 2
Figure 3
Figure 4