Cisco Cisco StadiumVision Director Manuale Di Manutenzione
l
The channel guide is automatically displayed on the TV when it is selected on the
phone.
l
The phone UI continues to display the channel guide after a channel has been
selected.
For individual luxury suites, you can override the setting that controls the automatic
display of the channel guide on the TV through the Control Panel.
Configuring Channel Guide Settings in the Registry
User Roles
Administrator
To configure channel guide settings in the registry, complete the following steps:
1. From the Management Dashboard, go to:
Tools > Advanced > Registry
2. To be sure that you are displaying the current settings, click Load.
3. Scroll through the Registry Data list to the desired parameters.
NOTE: To change the phoneControl.stayOnChannelSelect
parameter from its default (1), you must add the parameter using
Add Row.
4. Click the Value field beside each parameter and enter the appropriate values.
5. Click Apply.
Defining a Delay Channel
User Roles
Administrator / Content Manager
If you have assigned DMPs to a delay zone, then you can configure the channel you
want to display on the TVs controlled by the DMPs in the delay zone during the delay
event state.
122 of 285
© Cisco Systems, Inc. All rights reserved.