Cisco GainMaker Reverse Segmentable Node - 1GHz with 40 52 MHz Split Scheda Tecnica
Description
The GainMaker
®
High Output Node is designed to serve as
an integral part of today’s network architectures, and
combines the superior proven technologies of both the
GainMaker RF Amplifier and Prisma
combines the superior proven technologies of both the
GainMaker RF Amplifier and Prisma
®
Optical components.
The GainMaker High Output Node is capable of higher output
levels than the standard GainMaker Node. Featuring three
RF output ports, it is the ideal platform for delivering video
(digital and analog) as well as high-speed data services over
advanced hybrid fiber/coax (HFC) networks. With its modular
design of fiber receiver, reverse fiber transmitter and RF
amplifier electronics, the GainMaker High Output Node station
can provide a variety of functions required by advanced
networks.
The GainMaker High Output Node accommodates a second
forward receiver with an RF switch to accommodate forward
path optical redundancy. Reverse traffic can be combined and routed to FP, DFB, or CWDM reverse
transmitters. The High Gain Dual (HGD) launch amplifier module provides two high-level outputs (with the ability
to split one internally to feed a third port). Additionally, the node is available with an optional custom status
monitoring transponder for use with Scientific-Atlanta’s ROSA
levels than the standard GainMaker Node. Featuring three
RF output ports, it is the ideal platform for delivering video
(digital and analog) as well as high-speed data services over
advanced hybrid fiber/coax (HFC) networks. With its modular
design of fiber receiver, reverse fiber transmitter and RF
amplifier electronics, the GainMaker High Output Node station
can provide a variety of functions required by advanced
networks.
The GainMaker High Output Node accommodates a second
forward receiver with an RF switch to accommodate forward
path optical redundancy. Reverse traffic can be combined and routed to FP, DFB, or CWDM reverse
transmitters. The High Gain Dual (HGD) launch amplifier module provides two high-level outputs (with the ability
to split one internally to feed a third port). Additionally, the node is available with an optional custom status
monitoring transponder for use with Scientific-Atlanta’s ROSA
®
/ TNCS status monitoring and control element
manager. On-board temperature, automatic gain control (AGC) levels, RF switch position, power supply
condition, as well as other features/parameters can be monitored through this transponder.
condition, as well as other features/parameters can be monitored through this transponder.
Features
• Capable of higher output levels than standard GainMaker Nodes
• Forward redundancy with two 1310/1550 nm optical receivers (optional)
• Uses plug-in accessories common to all GainMaker products
• Cable to Linear EQ in amplifiers I/S EQ spot provides 14.5 dB of Linear tilt
• Local test points and LED indicators on optical receivers, transmitters, and optical interface board simplify
installation and maintenance
• AGC has thermal mode, eliminating disruptive RF output variation in the event of pilot loss
• QAM Pilot AGC now available in addition to existing analog AGCs
• Optional plug-in Status Monitoring
• Optional 3-state reverse switch (on/off/-6 dB) allows each reverse input to be isolated for noise and
ingress troubleshooting (status monitoring required)
• Fiber Management tray provides easy access to fiber connections and folds back to provide access to
optical transmitter and receivers
• Reverse input pad and RF test point for each reverse input port on launch amplifier allow optimum reverse
path design and alignment
GainMaker
®
High Output Node
5-40/52-1002 MHz
Optoelectronics