Intel D915GLVGL Manuale Utente

Pagina di 84
Intel Desktop Board D915GLVG Technical Product Specification 
26 
 
1.7 I/O Controller 
The I/O controller provides the following features: 
•  One serial port 
•  One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port  
(EPP) support 
•  Serial IRQ interface compatible with serialized IRQ support for PCI Conventional bus systems 
•  PS/2-style mouse and keyboard interfaces 
•  Interface for one 1.44 MB or 2.88 MB diskette drive 
•  Intelligent power management, including a programmable wake-up event interface 
•  PCI Conventional bus power management support 
The BIOS Setup program provides configuration options for the I/O controller. 
1.7.1 Serial 
Port 
The Serial port A connector is located on the back panel.  The serial port supports data transfers at 
speeds up to 115.2 kbits/sec with BIOS support.   
 
For information about  
Refer to 
The location of the serial port A connector 
1.7.2 Parallel 
Port 
The 25-pin D-Sub parallel port connector is located on the back panel.  Use the BIOS Setup 
program to set the parallel port mode.   
 
For information about  
Refer to 
The location of the parallel port connector 
1.7.3  Diskette Drive Controller 
The I/O controller supports one diskette drive.  Use the BIOS Setup program to configure the 
diskette drive interface. 
 
For information about  
Refer to 
The location of the diskette drive connector 
1.7.4  Keyboard and Mouse Interface 
PS/2 keyboard and mouse connectors are located on the back panel. 
 
NOTE 
The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 
connector.  Power to the computer should be turned off before a keyboard or mouse is connected or 
disconnected. 
 
For information about  
Refer to 
The location of the keyboard and mouse connectors