Jura 13341 Manuale Utente

4 Preparation at the touch of a button

To make sure the cappuccino frother always works properly, rinse

and clean it regularly (see Chapter 6, ‘Maintenance – Cappuccino

frother’).

To obtain a perfect water flow, use the removable hot water nozzle.

You can find the hot water nozzle under the cover of the storage

compartment.

The following temperatures can be selected for preparing hot

water:

Regular

Normal

Hot

There is a danger of scalding from hot water splashes.

Avoid direct contact with the skin.

First attach the hot water nozzle:

Carefully remove the cappuccino frother from the Connector

System

by twisting slightly.

Open the cover of the storage compartment, take out the

hot water nozzle and close the cover again.

Attach the hot water nozzle to the Connector System

rotating it slightly.

Place a cup under the hot water nozzle.

m T Touch the Hot water symbol.

WATER

appears on the display, and the temperature is

briefly displayed, e.g.

NORMAL

By touching the Hot water symbol several times (within

approximately 2 seconds) you can set the temperature to

your individual preference. This setting is not saved.

Hot water flows into the cup. You can follow the current

status of preparation on the progress bar.

Preparation stops automatically and

READY

appears on

the display.

During preparation, you can change the amount by turning

the Rotary Switch.

Hot water

CAUTION