Cisco Cisco ONS 15310-MA SONET Multiservice Platform Guida All'Installazione
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the DS1-28/DS3-EC1-3 and
DS1-84/DS3-EC1-3 Cards in the
Cisco ONS 15310-MA
DS1-84/DS3-EC1-3 Cards in the
Cisco ONS 15310-MA
Product Names: 15310-28WBE-3BBE, 15310-84WBE-3BBE
This document provides a card description, specifications, and an installation procedure for the
Cisco ONS 15310-MA DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 cards. As appropriate use this
document in conjunction with the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide,
the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, and the Cisco ONS 15310-CL
and Cisco ONS 15310-MA Troubleshooting Guide when working with DS1-28/DS3-EC1-3 and
DS1-84/DS3-EC1-3 cards.
Cisco ONS 15310-MA DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 cards. As appropriate use this
document in conjunction with the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide,
the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, and the Cisco ONS 15310-CL
and Cisco ONS 15310-MA Troubleshooting Guide when working with DS1-28/DS3-EC1-3 and
DS1-84/DS3-EC1-3 cards.
This document contains the following sections:
•
•
•
•
•
DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 Card Description
The ONS 15310-MA DS1-28/DS3-EC1-3 and DS1-84/DS3-EC1-3 cards provide 28 or 84
Telcordia-compliant, GR-499 DS-1 ports per card, respectively, and three DS-3/EC-1 ports. Each DS-1
port operates at 1.544 Mbps. Each DS-3/EC-1 port operates at 44.736 Mbps over a single 75-ohm 728 A
or equivalent coaxial span. These cards can operate as a working or protect card in 1:1 protection
schemes.
Telcordia-compliant, GR-499 DS-1 ports per card, respectively, and three DS-3/EC-1 ports. Each DS-1
port operates at 1.544 Mbps. Each DS-3/EC-1 port operates at 44.736 Mbps over a single 75-ohm 728 A
or equivalent coaxial span. These cards can operate as a working or protect card in 1:1 protection
schemes.
In addition, the DS1-28/DS3-EC1-3 card provides retiming, so that any outgoing DS-1 signal can be
retimed to eliminate accumulated jitter and wander at the point of egress from a synchronous network.
Any incoming DS-1 signal from the transport element can also be used as timing source.
retimed to eliminate accumulated jitter and wander at the point of egress from a synchronous network.
Any incoming DS-1 signal from the transport element can also be used as timing source.