Cisco Cisco TelePresence MX700
D14778.02 TC Console version 6 User Guide | © 2013 Cisco Systems, Inc. All rights reserved.
34
Audio Console
adding an input module
...the new input
will appear here
Click the arrow
next to the
settings to
expand the menu
add a new input...
If you are going to reconfigure the current system rather
than expanding it to add functionality, there is no need to
add new input modules. You may then just as well rename
an existing one and use that as your new module.
than expanding it to add functionality, there is no need to
add new input modules. You may then just as well rename
an existing one and use that as your new module.
To change the name of an existing input module, just
double-click on its name (for nameless modules double-
click where the name will appear when modules have
names).
double-click on its name (for nameless modules double-
click where the name will appear when modules have
names).
To create a new input module click
. A new
input will appear at the bottom, as shown. Give the new
local input a name and click the arrow to expand the
local input a name and click the arrow to expand the
field. To name a module later, double-click the
name field.
The settings are similar to those outlined in
on page page 26. Set as required.
The next thing to do will be to specify from which
physical input this input shall get its signal. This is
described on page 25.
physical input this input shall get its signal. This is
described on page 25.
To delete this input module, click on the
×
.
Introduction
Contents
Video compositor
Sources of inspiration