Kenwood Electronics RV-7000 Manuale Utente
English
29
Set
u
p
The detailed settings allow you to enjoy full performance of the
receiver according to the environment of your listening room.
receiver according to the environment of your listening room.
For creating the best listening environment, Kenwood
recommends to perform the setup at the listening position.
recommends to perform the setup at the listening position.
6(783
08/7,&21752/
Speaker setup flow
Speaker setup flow
Speaker settings consist of 7 elements.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL
∞/5] to select an item to set.
[SETUP]
Elements
Display
Setting
Speaker Configuration
"SP SETUP"
Selects whether each speaker channel is
used or, if used, its size.
used or, if used, its size.
Speaker Level
"TESTTONE"
Selects the output level from each
speaker.
speaker.
Speaker Distance
"DISTANCE"
Selects the distance between each
speaker and the listening position.
speaker and the listening position.
Crossover
"CROSSOVER"
Sets the lower limit of the bass
frequencies reproduced from the speakers
set to "NML" in the "SP SETUP". The
frequencies below the frequency set here
are distributed to other speakers (those
set to "LRG" and the subwoofer).
frequencies reproduced from the speakers
set to "NML" in the "SP SETUP". The
frequencies below the frequency set here
are distributed to other speakers (those
set to "LRG" and the subwoofer).
Low Frequency Effects
Level
Level
"LFE LVL"
Selects the level of bass audio
enhancement.
Low Frequency Effect channel delivers
separate non-directional bass signals to
the subwoofer for more dynamic deep
bass sound effects.
enhancement.
Low Frequency Effect channel delivers
separate non-directional bass signals to
the subwoofer for more dynamic deep
bass sound effects.
Lip Sync
"LIP SYNC"
Adjusts the deviation in time between
the video and audio.
the video and audio.
Auto Power Save
"APS"
Sets Auto Power Save ON/OFF.
"EXIT"
Exits the Detailed Setup mode.
2
Set each item.
See the followings for each setup item.
Speaker configuration
Speaker configuration
Select the use of each speaker and its size.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL
∞/5] to select "SP SETUP".
[SETUP]
2
Select the use and size of each speaker.
Use [MULTI CONTROL
∞/5] to select the speaker and its
use or size.
[SETUP]
Repeat the above operations until all of the speakers
have been set up.
have been set up.
Settings of RV-7000
Speaker
Display
Setting
Subwoofer
"SUBW ON"
Subwoofer is connected.
"SUBW OFF"
Subwoofer is not connected.
Front speaker
"FRNT LRG"
Large size front speaker
"FRNT NML"
Average size front speaker
Center speaker
"CNTR LRG"
Large size center speaker
"CNTR NML"
Average size center speaker
"CNTR OFF"
Center speaker is not connected.
Surround speaker
"SURR LRG"
Large size surround speaker
"SURR NML"
Average size surround speaker
"SURR OFF"
Surround speakers are not connected.
Front Height/
Surround
Back speaker
connection
Surround
Back speaker
connection
"FH/SB FH"
Front Height speaker is connected.
"FH/SB SB"
Surround Back speaker is connected.
"FH/SBOFF"
Front Height/Surround Back speaker is
not connected.
not connected.
Front Height
speaker
speaker
"FH LRG"
Large size front height speaker is
connected. (7.1ch)
connected. (7.1ch)
"FH NML"
Average size front height speaker is
connected. (7.1ch)
connected. (7.1ch)
Surround Back
speaker
speaker
"SB LRGX2"
Large size surround back speaker is
connected. (7.1ch)
connected. (7.1ch)
"SB LRGX1"
Large size surround back speaker is
connected. (6.1ch)
connected. (6.1ch)
"SB NMLX2"
Average size surround back speaker is
connected. (7.1ch)
connected. (7.1ch)
"SB NMLX1"
Average size surround back speaker is
connected. (6.1ch)
connected. (6.1ch)
Subwoofer
Re-mix*
Re-mix*
1
"RMX ON"
Subwoofer re-mix is on.
"RMX OFF"
Subwoofer re-mix is off.
Speaker setup (Detailed Setup)
Continued
B60-5827-08_00_En.indd 29
10.8.3 11:08:00 AM