Kenwood Electronics RV-7000 Manuale Utente
36
RV-7000/RV-6000/RA-5000
P
la
y
in
g m
u
si
c o
r mo
vi
e
5(&(,9(5
/,67(102'(
63($.(56
212))
212))
/,67(102'(
,13876(/(&725
∞/5
,138702'(
Turning on the power
Turning on the power
1
Turn the connected monitor and player component
ON.
2
Press [
RECEIVER] (remote control unit) or [
]
(main unit) to turn on the unit.
Setting the speaker system
Setting the speaker system
Press [SPEAKERS ON/OFF] to switch the speaker
output on or off.
output on or off.
"SP" indicator lights up when turning on the speaker system.
Selecting the input mode
Selecting the input mode
When playing a component connected to the digital input
terminal (CD, VIDEO or DVD) or the HDMI input terminal (HDMI 1,
HDMI 2, HDMI 3 or HDMI 4), set the input mode to match the type
of the audio input.
terminal (CD, VIDEO or DVD) or the HDMI input terminal (HDMI 1,
HDMI 2, HDMI 3 or HDMI 4), set the input mode to match the type
of the audio input.
1
Use [INPUT SELECTOR] to select "HDMI 1", "HDMI
2", "HDMI 3", "HDMI 4", "DVD", "VIDEO" or "CD"
input source.
input source.
2
Press [INPUT MODE] to select the input mode.
Each press switches the mode as follows.
When in HDMI 1, HDMI 2, HDMI 3 or HDMI 4 input
source
source
Display
Setting
"AUTO"
The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(Multi-channel PCM/Dolby Digital/DTS).
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(Multi-channel PCM/Dolby Digital/DTS).
"MANUAL"
The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.
When in DVD, VIDEO or CD input source
Display
Setting
"AUTO"
The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(PCM/Dolby Digital/DTS).
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(PCM/Dolby Digital/DTS).
"MANUAL"
The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.
"ANALOG"*
1
The input mode is fixed at analog.
This is selected for playback of analog player components.
This is selected for playback of analog player components.
*
1
This cannot be selected when in DTS play mode.
• The "AUTO DETECT" indicator lights when "AUTO" is
selected.
• If the audio is lost as a result of change in the input signal
while "MANUAL" is selected, press [LISTEN MODE].
Input source keys
Preparation for playing music or movie
B60-5827-08_00_En.indd 36
10.8.3 11:08:11 AM