Cisco Cisco TelePresence MX700 Guida Utente
24
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
User guide
www.cisco.com
Camera presets in a call
There may be camera presets stored on your system.
If so, these are available at all times during a call. How
to define camera presets is described in
If so, these are available at all times during a call. How
to define camera presets is described in
. Do as follows:
1. Tap the camera icon, as outlined:
2. Select the preset required, as outlined:
Near end camera control
You may control your own camera manually at all
times during a call. Your own camera is often referred
to as the near end camera. Do as follows:
times during a call. Your own camera is often referred
to as the near end camera. Do as follows:
1. Tap the camera icon, as outlined:
2. Adjust camera Pan and Zoom, as outlined:
3. Tap anywhere outside the menu to exit.
Far end camera control
If the other participants are on systems with adjustable
cameras, you may be able to control the pan and zoom
of their camera. Do as follows:
cameras, you may be able to control the pan and zoom
of their camera. Do as follows:
1. Tap as outlined. If you are in a call with more than
one (a conference), tap the one whose camera you
want to adjust.
want to adjust.
2. Then tap Camera Control.
3. Adjust pan and zoom as required:
4. Tap anywhere outside the menu to exit.