Cisco Cisco TelePresence MX700 Guida All'Installazione
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product, to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the
Configuration
tab, and click
System Configuration
.
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure from the
Mode
drop
down list:
• TMS – Cisco TelePresence Management System
• VCS – Cisco Video Communication Server
• Callway –WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
• VCS – Cisco Video Communication Server
• Callway –WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - Cisco UCM via Expressway
If you select
Off
, all configurations must be set manually on the
video system.
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
LoginName
and
Password
in the
respective input fields.
2. Enter the IP address or DNS name of the Cisco TMS server
in the
Address
input field under the
ExtermalManager
heading.*
3. Enter the
Path
to the provisioning service in the correspond-
ing input field.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
LoginName
and
Password
in the
respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
input field under the
ExtermalManager
heading.
3. Enter the SIP
Domain
for the Cisco VCS in the correspond-
ing input field.
Have a look at the
appendix for more
information about VCS provisioning.
CUCM
Enter the IP address or DNS name of the UCM provisioning
Enter the IP address or DNS name of the UCM provisioning
server in the
Address
input field under the
ExtermalManager
heading.*
You can find more details about setting up Cisco UCM provi-
sioning in the
Administering TC endpoints on CUCM
guide.
Cisco UCM via Expressway
Upon ordering the Cisco UCM via Expressway service, you have
Upon ordering the Cisco UCM via Expressway service, you have
received a username and password.
1. Enter the username in the
LoginName
input field. The user
name is in the form user@your.edge.domain.
2. Enter the password in the
Password
input field.
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the
Address
input field under the
ExternalManager
heading.
WebEx Telepresence (formerly Callway)
Upon ordering the Cisco WebEx Telepresence service, you have
received a
Video number
and an
Activation code
.
If you do not have a video phone number and an activation code,
contact your company's WebEx Telepresence administrator.
1. Enter the Video number in the
LoginName
input field.
2. Enter the Activation code in the
Password
input field.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
Back to task overview
If you are changing a value setting,
y
ou have to always click
save
to confirm the change.
Cisco TelePresence Video Systems
D14639.13 Video Systems Getting Started Guide TC7.1, APRIL 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
24
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Confirguration