KRAM 67666 Dépliant
Installation description
Interface Lead Item Nr. 67666
for Holden / Opel / Pontiac
with 12 pin VDA connector
for Holden / Opel / Pontiac
with 12 pin VDA connector
Needed items:
A: Interface Lead.
B: Interface Lead carkit adaptor.
C: Carkit.
Note: The Carkit C and Interface Lead adaptor B are bought sepa-
rately.
Installation:
1st: Remove the key from the ignition barrel. This is done to
avoid error messages on the car electrical system.
2nd. Locate the 12 pin VDA connector this can often be found
behind the glove-compartment. Please see picture on the right
page.
3rd. Check ignition source. Not all models have an ignition source in the prewired position in the cable set.
Therefore it is possible to disconnect the blue ignition wire from the cable set and connect it to an ignition source
found elsewhere or the red constant 12v wire by using the bullet connectors . Alternatively a IGNIBOX item nr. “I”
can be inserted to generate an artificial ignition.
4th: Check fuse size. The fuse on the Audio2Car cable should not be bigger than the ones used on the wiring
loom supplied with the carkit. The fuses on the Audio2Car cable should be replaced with a size similar to the ones
supplied with the carkit.
Note: Never exceed the Maximum Fuse size for the Interface Lead. See maximum fuse sizes on the last page.
5th. Connect Interface Lead ‘B’ to the 12 pin VDA connector from step 2.
6th. Connect the carkit ‘C’ to the Interface Lead using the Interface Lead adaptor ‘B’. Interface Lead adap-
tors for Music carkit include a 4 pin AUX connector. This is used for connecting an optional Kram AUX solution. By
adding a Kram AUX solution you will achieve a much higher audio quality when playing music from the carkit.
And the music will be heard in all speakers. Please see our website www.kram.dk for further information about
AUX solutions.
7th. Test function and adjust volume. When the Interface Lead is installed correctly it will redirect your call
through the car front speaker. Adjust the volume setting using the carkit and radio volume control. Note that too
high carkit volume will distort the sound.
Interface Leads
Interface Leads
See our complete Interface Lead program on www.kram.dk
A: Interface Lead
Item number 67xxx
Item number 67xxx
B: Interface Adaptor
Item number DAxxx
Item number DAxxx
C: Carkit
16 pin Connectors
Bullet Connectors
4 pin
Aux
Aux
The picture show the location of the
VDA connector in a Holden Commodore
12 pin VDA Connector