Cisco Headend Digital Broadband Delivery System Guida All'Installazione
Obtain System Configuration
4036043 Rev B
15
Obtain System Configuration
Complete the following steps to obtain basic system configuration data for both the
DNCS and the Application Server. You may need some of this information later
during the upgrade.
1 From an xterm window on the DNCS, type the following command and press
DNCS and the Application Server. You may need some of this information later
during the upgrade.
1 From an xterm window on the DNCS, type the following command and press
Enter. A list of IP (Internet Protocol) addresses and hostnames appears.
more /etc/hosts
2 On a sheet of paper, write down the IP addresses of the hosts that appear in the
/etc/hosts file.
Important: At a minimum, write down the IP addresses for the following hosts:
Important: At a minimum, write down the IP addresses for the following hosts:
appservatm _______________
dncsatm
_______________
dncseth
_______________
dncsted
_______________
3 Type the following command and press Enter. The hostname for the DNCS
appears.
uname -n
Important: Call Cisco Services if the hostname contains a period (.). Cisco
Services engineers will help you change it to a valid hostname.
Services engineers will help you change it to a valid hostname.
4 Write down the hostname for the DNCS, as displayed in step 3: __________
5 Type the following command and press Enter to verify that the network
5 Type the following command and press Enter to verify that the network
interfaces have been plumbed and configured correctly. Output should look
similar to the following example:
similar to the following example: