Cisco Cisco TelePresence MX700 Nota Di Rilascio
New features and functionality in TC4.2.0
Cisco TelePresence System C-Series Software Release Notes
Page 49 of 133
New software release for Cisco TelePresence PrecisionHD Camera
With the TC4.2.0 release, the PrecisionHD 1080p camera will automatically be upgraded to camera
software release ID40069. Included in this release is:
►
Improvements to auto focus
►
Improvement to hot pixel correction
►
Improvements with the automatic white balance.
►
EDID information is now only used when camera is set in auto mode. Previously auto would still
be used when the dipswitches was set.
New features accessible from Touch UI
Support for MultiWay conference
Support for standby (MX200 and C-Series only)
Support for restart
Support for factory defaulting the system
Support for camera presets for pan, tilt and zoom cameras.
Support for configuring VLAN settings and IPv6.
Support for configuring DNS server in the IP Settings menu.
Support for DVI/HDMI status on the system information page
New look and feel of the web interface
The web interface has a new look and feel. The new and intuitive navigation helps you find what you
need quickly. No features have been added or removed. See the TC4.2 versions of the administrator
guides for a description of the web interface. Go to:
Continuous auto focus for EX60
The EX60 can now be configured to use continuous auto focus. See the ‘New xConfigurations’ section
for further details.
Support for CEC (Consumer Electronics Control)
The HDMI outputs now support Consumer Electronics Control (CEC). When set to on (default is off),
and the monitor connected to the HDMI output is CEC compatible and CEC is configured, the system
will use CEC to set the monitor in standby when the system enters standby. Likewise the system will
wake up the monitor when the system wakes up from standby. Please note that the different
manufacturers uses different marketing names for CEC: Anynet+ (Samsung); Aquos Link (Sharp);
BRAVIA Sync (Sony); HDMI-CEC (Hitachi); Kuro Link (Pioneer); CE-Link and Regza Link (Toshiba);
RIHD (Remote Interactive over HDMI) (Onkyo); SimpLink (LG); HDAVI Control, EZ-Sync, VIERA Link
(Panasonic); EasyLink (Philips); and NetCommand for HDMI (Mitsubishi).
Support for unmute when not in conference
The codecs can now be configured to always be unmuted when not in a conference. Once configured,
pressing the mute button will not have any effect if you are not in a conference. This feature must be
configured using the API. See the ‘New API xConfigurations’ section for further details.
Support for VCS clustering
The system can now retrieve a list of SIP registrars and/or H.323 gatekeepers by configuring the unit
with the fully qualified domain name of the registrar/gatekeeper. Both NAPTR and SRV records are