Cisco Cisco TelePresence MX700 Guida All'Installazione
The Settings menu
•
System Information:
See an overview of the system configurations.
•
Call Status:
See an overview of the call parameters when in call (e.g. protocols, trans-
mit and receive rates, packet loss).
•
Language:
Select the language for the user interface.
•
Camera Control & Settings:
Set the camera parameters.
•
Display Settings:
Select brightness, color temperature and dVi mode for the main
video display.
•
Ringtone & Sound Settings:
Select a ring tone, the ring tone volume and key tone.
•
Background:
Select a background picture for your touch controller and main video display.
•
Main Source Selection:
Select the main input source, e.g. camera control.
•
Administrator Settings:
See below.
•
Restart:
Select this option to restart the system.
The Administrator Settings menu
•
Date, Time & Location:
Configure date and time settings.
•
Call Settings:
Configure the default bit rate and auto answer settings.
•
Network Settings:
See below.
•
Web Snapshots:
Allow/disallow the web snapshot feature.
•
EMC Resilience Mode:
Select this option to change the touch control-
ler's resilience to electromagnetic noise present.
•
Reset:
Select this option for a complete factory reset. All of your settings
are reset.
The Network Settings menu
•
IP & VLAN
: Configure the iP and VlAN settings. if the touch
controller is connected via lAN there are separate entries for
the codec and the touch.
•
Pairing:
Configure pairing between the codec and the touch
controller.
•
H323 Settings:
Configure the H.323 settings.
•
SIP settings
: Configure the SiP settings.
•
Provisioning:
Start the provisioning wizard.
•
Multiway:
insert the address of the Multiway server.
Settings
System Information
Camera Control & Settings
Display Settings
Ringtone & Sound Settings
Background
Main Source Selection
Administrator Settings
Call Status
Language
| Administrator Sett
Date, Time & Location
Network Settings
EMC Resilience Mode
Reset
Call Settings
Back
Web Snapshots
| Network Settings
IP & VLAN
Pairing
Back
Restart
Multiway
Provisioning
SIP Settings
H323 Settings
The Settings menu on the Touch
controller
All settings are not available on all products; therefore the
menu items shown to the right may or may not be present on
your system.
You can find a complete description of the touch controller
menus in the user guide for your video conference system.
Cisco telePresence Video Systems
d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.
Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.
32
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Appendicies