Cisco Cisco Firepower Management Center 2000

For more information on automatic application bypass, see 

Admin/Maint

In the Health Policy Configuration page, select 

.

The Health Policy Configuration — Automatic Application Bypass Status page appears.

Select 

 for the 

 option to enable use of the module for health status testing.

You have three options:

To save your changes to this module and return to the Health Policy page, click 

.

To return to the Health Policy page without saving any of your settings for this module, click 

.

To temporarily save your changes to this module and switch to another module’s settings to modify, 
select the other module from the list at the left of the page. If you click 

 when you 

are done, all changes you made will be saved; if you click 

, you discard all changes.

You must apply the health policy to the appropriate managed device if you want your settings to take 
effect. See 

 for more information.

Any

Any except 3D9900

Any

Excessive CPU usage may indicate that you need to upgrade your hardware or that there are processes 
that are not functioning correctly. Use the CPU Usage health status module to set CPU usage limits. 

If the CPU usage on the monitored appliance exceeds the Warning limit, the status classification for that 
module changes to Warning. If the CPU usage on the monitored appliance exceeds the Critical limit, the 
status classification for that module changes to Critical. That status data feeds into the health monitor.

The maximum percentage you can set for either limit is 100 percent, and the Critical limit must be higher 
than the Warning limit. 

Admin/Maint

On the Health Policy Configuration page, select 

.

The Health Policy Configuration — CPU Usage page appears.

Select 

 for the 

 option to enable use of the module for health status testing.

In the 

 field, enter the percentage of CPU usage that should trigger a critical health 

status.

In the 

 field, enter the percentage of CPU usage that should trigger a warning health 

status.

You have three options:

To save your changes to this module and return to the Health Policy page, click 

.