Cisco Cisco TelePresence MX700 Manuale Di Manutenzione

Manual registration of the endpoint

Product specific configuration layout

Navigate to the Product Specific Configuration Layout section:

If registered to TMS (Cisco TelePresence Management Suite)

or CTSMAN (Cisco TelePresence Manager), configure the

product specific configuration layout as appropriate.

Room Name (from Exchange(R)): This is the Exchange

Conference Room Name. It is used for scheduling meetings

where this TelePresence system participates. This setting

must match the e-mail address used in Exchange exactly.

Example: room123@example.com. Default value is ““

(empty) and maximum length is 64 characters.

Web Access: This parameter indicates whether the device

accepts connections from a web browser or other HTTP

clients. Disabling the web server functionality of the

device will block access to the TelePresence system's

internal web pages and certain support capabilities,

but will not degrade normal operation. Default value is

Disabled.

NOTE:

For the Web Access configuration change to take

effect, please make sure to Save and RESET the device

(do not use Restart or Apply Config).

SSH Access: This parameter indicates whether the device

accepts SSH connections. Disabling the SSH server

functionality of the device will block certain support

capabilities such as log file collection but will not degrade

normal operation. Default value is Disabled.

When done click

Save.

Navigate to: Device > Phone > Phone Configuration (continued from the previous page).

Navigate to the

Product Specific Configuration Layout section.

Cisco TelePresence Endpoints and Cisco Unified Communications Manager

Quick Reference Guide

D14996.09 Administering TC7.2 Endpoints on CUCM 10.5.1, NOVEMBER 2014.

Mandatory Optional

Contents

Introduction

CUCM configuration

Endpoint configuration

About passwords

Appendices

CUCM configuration