Cisco Cisco UCS C3260 Rack Server Scheda Tecnica
Intel® Ethernet Converged Network Adapter XL710
With Support for QSFP+ Connections
Network Connectivity
5
IPv6 offloading—Checksum and segmentation capability extended to
new standard packet type
Network Standards
Physical Layer Interface
Physical Layer Interface
IEEE 802.3:
• 40GBASE-SR4
• 40GBASE-LR4
SFF-8431:
• 40GSFP+ CR4 (Direct Attach Copper)
• 40GSFP+ CR4 to 4x SFP+ (Breakout Cable)
ADVANCED SOFTWARE FEATURES – ALL ADAPTERS
Adapter fault tolerance (AFT)
3
Adaptive load balancing (ALB)
3
IEEE 802.3ad (link aggregation control protocol)
PCIe Hot Plug*/Active peripheral component interconnect (PCI)
IEEE 802.1Q* VLANs
IEEE 802.3 2005* flow control support
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities
[Transmission control protocol (TCP), user datagram protocol (UDP),
Internet protocol (IP)]
[Transmission control protocol (TCP), user datagram protocol (UDP),
Internet protocol (IP)]
IEEE 802.1p*
TCP segmentation/large send offload
MSI-X supports Multiple Independent Queues
Interrupt moderation
Teaming Support
3
GENERAL
Connections
Single or Dual QSFP+ cages for:
• QSFP+ SR4 fiber-optic transceivers
• QSFP+ LR4 fiber-optic transceivers
• QSFP+ CR4 Direct Attach Cables
Intel® Ethernet QSFP+ Optics required for a fiber configuration
‡
SPECIFICATIONS
NETWORK OPERATION SYSTEM (NOS) SUPPORT –
ALL ADAPTERS
OPERATING SYSTEM
IA-32
X86-64
IA-64
Windows Server 2012 R2*
N/A
X
N/A
Windows Server 2012 R2 Core
N/A
X
N/A
Windows Server 2012
N/A
X
N/A
Windows Server 2012 Core
N/A
X
N/A
Windows Server 2008 R2*
N/A
X
N
Windows Server 2008 R2 Core
N/A
X
N
Linux* Stable Kernel version 2.6/4x
N/A
X
X
Linux RHEL 6.6, 6.7, and 6.8
N/A
X
X
Linux SLES 11 SP4 and SLES 12 SP1
N/A
X
X
FreeBSD* 10.2/10.3/11
N/A
X
X
UEFI* 2.1
N/A
X
X
UEFI* 2.3 and 2.4
N/A
X
X
VMware ESXi 5.1 (Limited Functionality)
N/A
X
N/A
VMware ESXi 5.5
N/A
X
N/A
INTEL® BACKING INFORMATION
Backed by an Intel limited lifetime warranty, 90-day money-back
guarantee (U.S. and Canada), and worldwide support.
Switch fault tolerance (SFT)
3
TECHNICAL FEATURES
Operating temperature
0 °C to 55 °C (32 °F to 131 °F)
Air flow
Minimum of 150 LFM required.
Additionally for LR4, the following is
required:
Additionally for LR4, the following is
required:
• 55 °C @ 400 LFM
• 50 °C @ 250 LFM
• 45 °C @ 150 LFM
Storage temperature
-40 °C to 70 °C (-40 °F to 158 °F)
Storage humidity
Maximum: 90% non-condensing
relative humidity at 35 °C
LED Indicators
LINK (solid) and ACTIVITY (blinking)
LINK SPEED (green=40 Gbps;
yellow=10 Gbps)
LINK SPEED (green=40 Gbps;
yellow=10 Gbps)
Physical Dimensions
XL710 DA2
Low-profile PCIe
2.703 in. x 6.578 in.
Data rate supported per
port
port
• 40GbE mode: 40GbE
• 4x10GbE mode:10GbE
Bus type
PCIe 3.0 (8 GT/s)
Bus width
8-lane PCIe
Interrupt levels
INTA, MSI, MSI-X
Hardware certifications
FCC B, UL, CE, VCCI, BSMI, CTICK, KCC
Controller-processor
Intel® Ethernet Controller XL710-BM2
Power Consumption
SKU
TYPICAL POWER
MAX POWER
Single-port 40GBASE-SR4
4.2 W
4.6 W
Single-port 40GBASE-CR4
3.4 W
3.8 W
Single-port 40GBASE-LR4
6.6 W
7.5 W
Dual-port 40GBASE-CR4
3.6 W
4.0 W
Dual-port 40GBASE-SR4
4.9 W
5.6 W
Dual-port 40GBASE-LR4
8.5 W
9.5 W