Brother HL-5050 Guida All'Installazione Rapida
3
FDA-regler (gælder kun for 100 til 120 volt-modellen)
U.S. Food and Drug Administration (FDA) har indført bestemmelser for
laserprodukter, der er fremstillet efter d. 2 august 1976. Overholdelse af
disse bestemmelser er obligatorisk for produkter, der markedsføres i USA. Et
af de følgende labels bag på printeren indikerer overholdelse af FDA-
reglerne og skal være påsat laserprodukter, der markedsføres i USA.
laserprodukter, der er fremstillet efter d. 2 august 1976. Overholdelse af
disse bestemmelser er obligatorisk for produkter, der markedsføres i USA. Et
af de følgende labels bag på printeren indikerer overholdelse af FDA-
reglerne og skal være påsat laserprodukter, der markedsføres i USA.
☛
Forsigtig:
Anvendelse af andre styreenheder, justeringer eller
udførelse af procedurer, som ikke er specificeret i denne
manual, kan medføre farlig stråling.
udførelse af procedurer, som ikke er specificeret i denne
manual, kan medføre farlig stråling.
IEC 60825-specifikation (gælder kun for 220 til 240 volt-
modellen)
modellen)
Denne printer er et Klasse 1-laserprodukt som defineret i specifikationerne
IEC 60825. Mærkatet herunder klæbes på produktet i de lande, hvor det er
påkrævet.
IEC 60825. Mærkatet herunder klæbes på produktet i de lande, hvor det er
påkrævet.
Denne printer indeholder en klasse 3B-laserdiode, som udsender usynlig
laserstråling i scannerenheden. Du bør under ingen omstændigheder åbne
scannerenheden.
laserstråling i scannerenheden. Du bør under ingen omstændigheder åbne
scannerenheden.
☛
Forsigtig:
Anvendelse af andre styreenheder, justeringer eller
udførelse af procedurer, som ikke er specificeret i denne
manual, kan medføre farlig stråling.
udførelse af procedurer, som ikke er specificeret i denne
manual, kan medføre farlig stråling.
Kun for Finland og Sverige
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
☛
Varoitus!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
☛
Varning
Om apparaten används på annat sätt än i denna
Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
Intern laserbestråling
Maks. strålingshårdhed:
5 mW
Bølgelængde:
760 - 810 nm
Laserklasse:
Klasse IIIb
(I overensstemmelse med 21 CFR
afsnit 1040.10)
Klasse 3B
(I overensstemmelse med IEC 60825)
(I overensstemmelse med 21 CFR
afsnit 1040.10)
Klasse 3B
(I overensstemmelse med IEC 60825)
VIGTIGT – for din sikkerheds skyld
For at opnå sikker betjening skal det medfølgende stik kun sættes i en
standardstikkontakt, som er jordet gennem de normale elektriske
installationer.
standardstikkontakt, som er jordet gennem de normale elektriske
installationer.
Forlængerledninger, der anvendes sammen med apparatet, skal have stik
med tre ben og være korrekt tilsluttet for at sikre korrekt jording.
Forlængerledninger, der er tilsluttet forkert, kan forårsage personskader og
beskadige apparatet.
med tre ben og være korrekt tilsluttet for at sikre korrekt jording.
Forlængerledninger, der er tilsluttet forkert, kan forårsage personskader og
beskadige apparatet.
At apparatet fungerer tilfredsstillende betyder ikke nødvendigvis, at
strømmen er jordet, og at installationen er sikker. For din egen sikkerheds
skyld, skal du kontakte en kvalificeret elektriker, hvis du er i tvivl om, hvorvidt
strømmen er jordet.
strømmen er jordet, og at installationen er sikker. For din egen sikkerheds
skyld, skal du kontakte en kvalificeret elektriker, hvis du er i tvivl om, hvorvidt
strømmen er jordet.
Afbryder
Denne printer bør placeres tæt på en stikkontakt med uhindret adgang. I
nødstilfælde skal du tage ledningen ud af stikkontakten for at afbryde
strømmen helt.
nødstilfælde skal du tage ledningen ud af stikkontakten for at afbryde
strømmen helt.
Forsigtighedsregler for batterier
Udskift ikke batteriet. Der er eksplosionsfare, hvis batteriet udskiftes forkert.
Batteriet må ikke skilles ad, genoplades eller brændes. Brugte batterier skal
bortskaffes i henhold til lokale bestemmelser.
Batteriet må ikke skilles ad, genoplades eller brændes. Brugte batterier skal
bortskaffes i henhold til lokale bestemmelser.
Forsigtighedsregler for lokalnetstik
Slut dette produkt til det lokalnetstik, som ikke udsættes for overspænding.
IT-strømsystem (Kun for Norge)
Dette produkt er også designet til IT-strømsystemer med fase-fase-
spænding på 230 V.
spænding på 230 V.
Opmerking / Oplaadbare Batterij Recycle Informatie (Kun for
Holland)
Holland)
Bij dit product zijn batterijen geleverd. Wanneer deze
leeg zijn, moet u ze niet weggooien maar inleveren als
Klein Chemisch Afval.
leeg zijn, moet u ze niet weggooien maar inleveren als
Klein Chemisch Afval.
Geräuschemission / Acoustic Noise Emission (Kun for
Tyskland)
Tyskland)
Lpa < 70 dB (A) DIN 45635-19-01-KL2
Wiring information (for Storbritannien)
Important
If the mains plug that is supplied with this printer is not suitable for your plug
socket, remove the plug from the mains lead and fit an appropriate three-pin
plug. If the replacement plug needs a fuse, fit the same fuse as the original.
socket, remove the plug from the mains lead and fit an appropriate three-pin
plug. If the replacement plug needs a fuse, fit the same fuse as the original.
If a moulded plug comes off the mains lead, you should destroy it because a
plug with cut wires is dangerous if it is put in a live plug socket. Do not leave
it where a child might find it!
plug with cut wires is dangerous if it is put in a live plug socket. Do not leave
it where a child might find it!
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to
BS1362 with the same rating as the original fuse.
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code :
Green and Yellow:
Earth
Blue: Neutral
Brown: Live
Brown: Live
The colours of the wires in the mains lead of this printer may not match the
coloured markings identifying the terminals in your plug.
coloured markings identifying the terminals in your plug.
If you need to fit a different plug, you should do the following.
Remove a bit of the outer cover of the lead, taking care not to damage the
coloured insulation of the wires inside.
coloured insulation of the wires inside.
Cut each of the three wires to the appropriate length. If you can, leave the
green and yellow wire longer than the others so that, if the lead is pulled out
of the plug, the green and yellow wire will be the last to disconnect.
green and yellow wire longer than the others so that, if the lead is pulled out
of the plug, the green and yellow wire will be the last to disconnect.
Remove a short section of the coloured insulation to expose the wires.
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter "E" or the safety earth
symbol
terminal in the plug which is marked with the letter "E" or the safety earth
symbol
, or coloured green or green and yellow.
The wire, which is coloured blue, must be connected to the terminal, which is
marked with the letter "N" or coloured black or blue.
marked with the letter "N" or coloured black or blue.
The wire, which is coloured brown, must be connected to the terminal, which
is marked with the letter "L" or coloured red or brown.
is marked with the letter "L" or coloured red or brown.
The outer cover of the lead must be secured inside the plug. The coloured
wires should not hang out of the plug.
wires should not hang out of the plug.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21
CFR subchapter J.
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21
CFR subchapter J.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21
CFR Subchapter J
CLASS 1LASERP RODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT