Brother HL-1870N Guida Utente

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION 

5-4

 

 

Skip this section if you wish to use the print server remote console or Web 
Browser to configure the print server. 
 
Using the BRAdmin application, you can configure the Brother print server using 
the TCP/IP protocol, or the IPX protocol.  
 
The steps required to configure the print server to receive print jobs from a 
Windows 95/98//Me/NT4.0/2000/XP. PC running the BIP software is as follows: 
 

1. Start 

BRAdmin. 

 
2.  Select the node name of the desired Brother print server from the list and 

double clicking on it. (the default node name is  usually BRN_xxxxxx, 
where "xxxxxx" is the last six digits of the Ethernet address (MAC 
address)). You will be prompted for a password, the default password is 
"access". 

  
You can find the node name and MAC address by printing out the printer 
configuration page. Refer to the User’s Guide for information on how to print the 
configuration page on your print server. 
 
 

3.  Click on the POP3/SMTP tab. 
 
4.  Enter the IP address of the POP3 server (consult your network 

administrator if you do not know this address). 

 
5.  Enter the mailbox name for the remote Brother print server. Usually this 

will be the first part of the E-mail address (for example, if the E-mail 
address of the print server is emailprinter@xyz, then the mailbox name 
would be emailprinter). 

 
6.  Enter the password for the mailbox, if any. 
 
7.  The print server is configured by default to poll the POP3 server every 

30 seconds. You may change this value, if desired. 

 
8.  If you have enabled notification, enter the IP address of your SMTP 

server (consult your network administrator if you do not know this 
address). 

 
9.  Press the OK button and save the changes. Now exit the BRAdmin 

application. You have now configured the print server to receive print 
jobs.