Brother ADS-2800W Guida Utente
Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
22
3
Configuration in Ad-hoc Mode
3
Using a Configured SSID
3
If you are trying to pair the machine to a computer that is already in Ad-hoc mode with a configured SSID,
complete the following steps:
complete the following steps:
1
Before configuring your machine, we recommend writing down your wireless network settings. You will
need this information to proceed with the configuration.
Check and record the current wireless network settings of the computer you are connecting with.
need this information to proceed with the configuration.
Check and record the current wireless network settings of the computer you are connecting with.
NOTE
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
an SSID already configured. For instructions on how to set your computer to Ad-hoc mode, see the
information included with your computer or contact your network administrator.
an SSID already configured. For instructions on how to set your computer to Ad-hoc mode, see the
information included with your computer or contact your network administrator.
For example:
3
NOTE
Your Brother machine supports the use of the first WEP key only.
Network name (SSID)
Communication Mode
Encryption mode
Network key
Ad-hoc
NONE
—
WEP
Network name (SSID)
HELLO
HELLO
Communication Mode
Encryption mode
Network key
Ad-hoc
WEP
12345