Brother SB8000 Guida Al Funzionamento
Attaching the Embroidery Foot 147
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the Embroidery Foot
This section describes how to attach the embroidery foot.
Attaching the embroidery foot
Attach the embroidery foot when embroidering. Have
the included embroidery foot “Q” and a screwdriver
ready.
the included embroidery foot “Q” and a screwdriver
ready.
a Embroidery foot bar
b Caught by the presser foot holder screw
b Caught by the presser foot holder screw
CAUTION
a
Press
(“Needle Position” button) once or
twice to raise the needle.
a “Needle Position” button
X
The needle goes up.
b
Turn off the sewing machine.
CAUTION
c
Raise the presser foot lever.
a Presser foot lever
X
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
d
Press and hold the black button on the back of
the presser foot holder to detach the presser
foot.
the presser foot holder to detach the presser
foot.
a Black button
b Presser foot holder
b Presser foot holder
● Always use the embroidery foot “Q”
when embroidering. If the wrong presser
foot is used, the needle may hit the
presser foot and break or bend.
foot is used, the needle may hit the
presser foot and break or bend.
2
1
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
injuries may occur if
(“Start/Stop”
button) is accidentally pressed and the
machine starts sewing.
machine starts sewing.