Brother DCP-L5500DN Guida Alla Sostituzione
- 3 -
5
Go to http://www.brother.com/original/index.html for instructions on how to return your used supplies to the Brother collection program. If you choose not to return used
supplies, please discard them according to local regulations, keeping them separate from domestic waste. If you have questions, call your local waste disposal office.
[ English ]
RESET THE DRUM UNIT COUNTER
Make sure the machine is turned on.
<For HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
<For HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
HL-L6200DW(T) / HL-L6250DN / HL-L6250DW>
(1) Make sure that the front cover is open.
(1) Make sure that the front cover is open.
(2) Press and hold
OK for about two seconds to display
Drum Unit, and then press OK.
(3) Press a to select
Reset.
(4) Close the front cover.
<For HL-L6300DW(T) / HL-L6400DW(T) / DCP-L5500D /
DCP-L5500DN / DCP-L5600DN / DCP-L5650DN / DCP-L6600DW /
MFC-L5700DN / MFC-L5700DW / MFC-L5750DW / MFC-L5755DW /
MFC-L5800DW / MFC-L5850DW / MFC-L5900DW / MFC-L6700DW /
MFC-L6750DW / MFC-L6800DW / MFC-L6900DW>
(1) Close the front cover.
(1) Close the front cover.
(2) Press to interrupt the error.
(3) (For HL Models) Press (
Settings) >
Machine Information > Parts Life.
(
For DCP and MFC Models) Press (
Settings) >
All Settings > Machine Info. > Parts Life.
(4) (For HL Models) Press
Drum Life until the Touchscreen
message changes, and then press
Yes.
(
For DCP and MFC Models) Press
Drum until the
Touchscreen message changes, and then press
Yes.
(5) Press .
5
Unter http://www.brother.com/original/index.html finden Sie Anweisungen, wie Sie die Verbrauchsmaterialien im Rahmen des Brother Recyclingprogramms zurücksenden
können. Wenn Sie sich gegen die Rücksendung der Verbrauchsmaterialien entscheiden, entsorgen Sie die Verbrauchsmaterialien gemäß den örtlichen Bestimmungen
getrennt vom normalen Hausmüll. Wenn Sie Fragen haben, wenden Sie sich an Ihren örtlichen Wertstoffhof.
[ Deutsch ]
Setzen Sie den ZÄHLER DER TROMMELEINHEIT zurück
Stellen Sie sicher, dass das Gerät eingeschaltet ist.
<Für HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
<Für HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
HL-L6200DW(T) / HL-L6250DN / HL-L6250DW>
(1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist.
(1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist.
(2) Halten Sie
OK ungefähr zwei Sekunden lang gedrückt, bis
Trommel angezeigt wird. Drücken Sie dann OK.
(3) Drücken Sie a, um
Reset auszuwählen.
(4) Schließen Sie die vordere Abdeckung.
<Für HL-L6300DW(T) / HL-L6400DW(T) / DCP-L5500D /
DCP-L5500DN / DCP-L5600DN / DCP-L5650DN / DCP-L6600DW /
MFC-L5700DN / MFC-L5700DW / MFC-L5750DW / MFC-L5755DW /
MFC-L5800DW / MFC-L5900DW / MFC-L6700DW / MFC-L6750DW /
MFC-L6800DW / MFC-L6900DW>
(1) Schließen Sie die vordere Abdeckung.
(1) Schließen Sie die vordere Abdeckung.
(2) Drücken Sie , um den Fehler abzubrechen.
(3) (HL-Modelle) Drücken Sie (
Einst.) >
Geräteinformationen > Lebensdauer.
(DCP- und MFC-Modelle) Drücken Sie (
Einstell.) >
Alle Einstell. > Geräte-Info > Teilelebensdauer.
(4) (HL-Modelle) Drücken Sie
Trommel Lebensd., bis die
Meldung im Touchscreen wechselt, und drücken Sie dann
Ja.
(DCP- und MFC-Modelle) Drücken Sie
Trommel, bis die
Meldung im Touchscreen wechselt, und drücken Sie dann
Ja.
(5) Drücken Sie .
5
Voir http://www.brother.com/original/index.html pour savoir comment retourner vos consommables usagés dans le cadre du programme de collecte Brother. Si vous ne
renvoyez pas votre consommable, mettez-le au rebut conformément aux réglementations locales en vigueur, en le séparant des ordures ménagères. Si vous avez des
questions, appelez les autorités locales compétentes en la matière.
[ Français ]
RÉINITIALISEZ LE COMPTEUR DU TAMBOUR
Assurez-vous que l’appareil est sous tension.
<Pour HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
<Pour HL-L5000D / HL-L5100DN(T) / HL-L5200DW(T) /
HL-L6200DW(T) / HL-L6250DN / HL-L6250DW>
(1) Assurez-vous que le capot avant est ouvert.
(1) Assurez-vous que le capot avant est ouvert.
(2) Maintenez la touche
OK enfoncée pendant environ deux
secondes pour afficher l’option
Tambour, puis appuyez sur OK.
(3) Appuyez sur a pour sélectionner
Init..
(4) Fermez le capot avant.
<Pour HL-L6300DW(T) / HL-L6400DW(T) / DCP-L5500D /
DCP-L5500DN / DCP-L5600DN / DCP-L5650DN / DCP-L6600DW /
MFC-L5700DN / MFC-L5700DW / MFC-L5750DW / MFC-L5755DW /
MFC-L5800DW / MFC-L5850DW / MFC-L5900DW / MFC-L6700DW /
MFC-L6750DW / MFC-L6800DW / MFC-L6900DW>
(1) Fermez le capot avant.
(2) Appuyez sur pour mettre fin à l’erreur.
(3) (Pour les modèles HL) Appuyez sur (
Param (Param.) ) >
Infos appareil (Info appareil) >
Durée de vie pièces (Vie pièces).
(Pour les modèles DCP et MFC) Appuyez sur (
Param) >
Ts paramètres (Ts réglages) > Info. appareil (Info.
machine) > Durée de vie des pièces.
(4) (Pour les modèles HL) Appuyez sur
Vie du tambour (Vie
tambour) jusqu’à ce que le message de l’écran tactile change,
puis appuyez sur
Oui.
(Pour les modèles DCP et MFC) Appuyez sur
Tambour
jusqu’à ce que le message de l’écran tactile change, puis
appuyez sur
Oui.
(5) Appuyez sur .
Finish
Fertig
Terminer