Samsung HT-J4550K Manuale Utente

 - English

Connections

Installing the Speakers on the Tallboy Stand

*  HT-J4530K only - Front Speakers
*  HT-J4550K only - Front/Surround Speakers
1.  Turn the Stand Base upside-down and connect it 

to the Stand.

2.  Use the driver to combine the screws on the 3 

marked holes.

3.  Straighten a supplied speaker wire and put in the 

hole on the centre of Stand Base.

4.  Connect the upper Speaker to the assembled 

Stand.

5.  Insert a screw clockwise into the hole on the rear 

of the speaker using a screwdriver.  

And then connect a speaker cable.

6.  This is the appearance after the speaker is 

installed. 

Follow this steps to install other speaker.

Speaker Cable Connections

1.  Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each 

bundle to the coloured sticker on the bottom of each speaker.

2.  Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of 

the speaker plugs to the colours of the speaker jacks.

1

Stand Base 

Stand  

2

3

4

Speaker

Stand  

5

6

02830T-HT-J4500_ZN-ENG_0212.indd   9

2015/4/28   8:35:11