Samsung Mono Multifunction PrinterSL-M2875FD w/Fax and Duplex Manuale Utente

You can enable Wi-Fi Direct feature by one of the following methods.

After the driver installation is complete, Samsung Easy Printer Manager can be 

used to change Wi-Fi Direct settings.

 

Samsung Easy Printer Manager is Available for Windows

and Mac OS users only.

 

•

From the Start menu, select Programs or All Programs > Samsung 
Printers > Samsung Easy Printer Manager > Device Settings > Network.

-

Wi-Fi Direct On/Off: Select On to enable.

-

Device Name: Enter the printer’s name for searching for your printer on 
a wireless network. By default, the device name is the model name.

-

IP Address: Enter the IP address of the printer. This IP address is used 
only for the local network and not for the infrastructure wired or wireless 
network. We recommend using the default local IP address (the default 
local IP address of the printer for Wi-Fi Direct is 192.168.3.1 )

-

Group Owner: Activate this option to assign the printer the Wi-Fi Direct 
group’s owner. The Group Owner acts similar to a wireless access point. 
We recommend activating this option.

-

Network Password: If your printer is a Group Owner, a Network 
Password is required for other mobile devices to connect to your 
printer. You can configure a network password yourself, or can 
remember the given Network Password that is randomly generated by 
default.

 

Accessing menus may differ from model to model (see "Accessing the 
menu" on page 33 ).

 

•

Select (Menu) > Network > Wireless > Wi-Fi Direct on the control 

panel.

•

Enable Wi-Fi Direct.

If your printer is using a network cable or a wireless access point, you can enable 

and configure Wi-Fi Direct from SyncThru™ Web Service.

•

Access SyncThru™ Web Service, select Settings > Network Settings > 
Wireless > Wi-Fi Direct.

•

Enable or disable Wi-Fi Direct and set other options.