Samsung Soundstand HW-H610 Manuale Utente

REMOTE CONTROL

 

 Press the Bluetooth POWER button on the remote to turn the 

Bluetooth Power function on and off. 

See pages 16 and 18 for details.

 Turns the SoundStand on and off.

 Adjusts the volume level of the unit.

 Press to select a sound effect mode. 

Select the STANDARD mode if you want to enjoy the original sound. 

When you choose a Sound Effect mode (except STANDARD), 

Surround Sound Expansion will automatically be turned OFF.

 If there is more than one file on the device you are playing, and 

you press the # button, the previous file is selected.

 You can turn the volume down to 0 with the push of a button. 

Press again to restore the sound to the previous volume level.

 If the SoundStand is connected to a digital TV and the video 

appears out of synch with the audio, press the Audio Sync 

buttons to synch the audio with the video. 

Press the AUDIO SYNC +/- buttons to set the audio delay from 0 

to 300 ms.  In USB mode, TV mode, or BT mode, the Audio Sync 

function may not work.

+   Installing the Batteries in the Remote Control

1.   Use a suitable coin to turn 

the remote control's 
battery cover 
counterclockwise to 
remove it as shown in the 
figure above.

2.   Insert a 3V lithium battery. Keep the 

positive (+) pole facing up when 
inserting the battery. Put the battery 
cover on and align the ' ' marks side 
by side as shown in the figure above.

3.   Use a suitable coin to turn 

the remote control battery 
cover clockwise as far as it 
will go to fix it in place.