Samsung SADT-101WM Manuale Utente

Installation

Select a location that will support four times the total weight of the
product to be installed (about 32 kg).

Use the Back Plate to mark the positions of the M10 anchor
bolts/nuts on the wall, drill the holes and install the anchor
bolts/nuts.

• When installing in the corner of a wall, use the Corner Mounted Adaptor

(SADT-110CM). When installing on a pole, use the Pole Mounted Adaptor

(SADT-100PM).

If the cable pipe is installed inside the wall:

1) Pull the power cable, video-out cable and communications cable out through

the holes of the Back Plate and Wall Mounted Adaptor. Take care not
toavoid damageto the cable sleeving.

•

When installing with the Corner Mounted Adaptor or the Pole Mounted
Adaptor, use a PG-13.5 Cable Gland for watertightness.

If the cable pipe is installed on the wall:

1) Make a hole of 21mm in diameter on the outside of the pipe (on the side and

near the tip) and install a PG13.5 cable gland.

2) Pull the cables out to the Wall Mounted Adaptor through the cable gland.

•

Positions for the hole (unit: mm)