Samsung 蓝光播放器 BD-H5900 Manuale Utente
*If Source Stream is 2ch, "Re-encoded
Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio
soundtrack of the main feature.
- BONUSVIEW audio : An additional
soundtrack such as the director or
actor’s commentary.
- Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different
on each Blu-ray Disc.
✎
NOTES
`
Be sure to select the correct Digital Output
or you will hear no sound or just loud noise.
`
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as
PCM.
`
Regular DVDs do not have BONUSVIEW
audio and Navigation Sound Effects.
`
Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`
If you play MPEG audio soundtracks, the
audio signal outputs as PCM regardless
of your Digital Output selections (PCM or
Bitstream).
`
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS),
the player may output PCM 2ch downmixed
audio even though you selected Bitstream
(either Re-encoded or Unprocessed) in the
setup menu.
`
If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio even
though you set PCM Downsampling to Off.
1.
In the Home menu, press the
▲▼◄► buttons to select Settings,
and then press the v button.
2.
Press the ▲▼ buttons to select
Network, and then press the v
button.
3.
Press the ▲▼ buttons to select
Network Settings, and then press
the v button.
4.
Press the ▲▼ buttons to select
Network Type, and then press the
v
button.
5.
Press the ▲▼ buttons to select
Wired or Wireless, and then press
the v button.
6.
Go to the next section.
Configuring your Network
Connection
Before you begin, contact your ISP to find
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired network,
connect the player to your router
using a LAN cable before you start the
configuration procedure.
If you are connecting to a wireless
network, disconnect any wired network
connection before you begin.
To begin configuring your network
connection, follow these steps:
Wired Network
Ğ
Wired - Automatic
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the v button.
4.
Select Wired in the Network Settings
screen, and then press the v button.
5.
Select Connect button, and then
press the v button. The product
detects the wired connection, verifies
the network connection and then
connects to the network.
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set
the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic,
Follow Steps 1 and 2 in Wired - Automatic,
and then follow these steps:
1.
Select Network Status. The player
searches for a network, and then
displays the connection failed message.
2.
On the bottom of the screen, select
IP Settings, and then press the v
button.
The IP Settings screen appears.
3.
Select the IP Setting field, and then
press the v button.
4.
Select Enter manually in the IP
Setting field, and then press the v
button.
5.
Select a value to enter (IP Address,
for example), and then press the v
button.
PCM downsampling
Lets you choose to have 96KHz PCM
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz before
they are outputted to an amplifier. Choose
On if your amplifier or receiver is not
compatible with a 96KHz signal.
dynamic Range Control
Lets you apply dynamic range control to
dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
True HD audio.
• Auto : Automatically controls the
dynamic range of Dolby TrueHD audio,
based on information in the Dolby
TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range
uncompressed, letting you hear the
original sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
downmixing Mode
Lets you select the multi-channel downmix
Lets you select the multi-channel downmix
method that is compatible with your
stereo system. You can choose to have
the player downmix to normal stereo or to
surround compatible stereo.
Network Settings
To begin setting up the network
connection for your player, follow
these steps:
13