Samsung Gas Dryer with Steam Manuale Utente

Troubleshooting

English  43 

Problem

Action

Items still wrinkled 
after WRINKLE 
PREVENT  
(WRINKLE-CARE, 
WRINKLE RELEASE).

•  Small loads of 1 to 4 items work best.
•  Load fewer items. Load similar-type items.
•  Take out the items immediately after drying is complete.

Water drips from the 
nozzle when STEAM 
CARE starts.

•  This is steam condensation. The dripping water will stop after 

a short time. 

Sprayed water is not 
visible during STEAM 
CARE.

•  Sprayed water is difficult to see when the door is closed.

Extended time.

•  Sensor Dry automatically senses the moisture in the load 

and shuts the dryer off when the selected dryness level is 
reached. 
The drying time can change according to the type and 
amount of laundry. See the cycle chart for reference.

If a problem persists, contact a local Samsung service center.

Information codes

If the dryer fails to operate, you may see an information code on the display panel. 
To determine what you should do, check the list codes in the table below and try the 
suggested actions.

Code

Action

dC

Operating the dryer with the door open.
•  Make sure the door is properly closed.
•  Make sure laundry is not caught in the door.

FC

Invalid power source frequency
•  Try restarting the cycle.
•  If this information code remains, contact a Samsung customer 

service center.

AC

Electronic control problem (Invalid Communication).
•  Contact a Samsung a customer service center.

DV7750M-03170Y-00_EN.indd   43

2016-12-28     11:43:24