Samsung Freestanding Gas Ranges (NX58K9500 Series) Guida All'Installazione

LOCATION SAFETY

WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, 

obey the following precautions.

•  This range is for indoor, household use only.  

Do not install the range in areas exposed to the 

weather and/or water.

•  Do not install the range in a place which is 

exposed to a strong draft.

•  Select a level, well-constructed floor that can 

support the range’s weight. Synthetic flooring, 

such as linoleum, must withstand 180 °F (82 

°C) temperatures without shrinking, warping, or 

discoloring. Do not install the range directly over 

interior kitchen carpeting unless a sheet of ¼ inch 

plywood or a similar insulator is placed between 

the range and carpeting.

•  Select a location where a grounded, 3- prong outlet is easily accessible.
•  If the range is located near a window, do not hang long curtains or paper blinds on that 

window.

•  For the range to ventilate properly, make sure the range’s vents are not blocked, and that 

there is enough clearance at the top, back, sides, and underneath the range. The vents 

allow the necessary exhaust for the range to operate properly with correct combustion.

•  Make sure the wall coverings around the range can withstand heat up to 200 °F (93 °C) 

generated by the range.

•  Cabinet storage above the surface of the range should be avoided. If cabinet storage 

above the range is necessary: allow a minimum clearance of 40 inches (102 cm) between 

the cooking surface and the bottom of cabinets; or install a range hood that projects 

horizontally a minimum of 5 inches (12.7 cm) beyond the bottom of the cabinets.

COOKTOP SAFETY 

WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, 

obey the following precautions.

•  Make sure all burners are off when not in use.
•  Do not use aluminium foil to line the grates or 

any part of the cooktop.

•  Do not leave burners unattended on medium or 

high heat settings.

•  Before igniting, make sure all burner caps are 

properly in place and all burners are level.