Samsung 500 W 5.1.4 Ch Soundbar HW-K950 Guida All'Installazione Rapida

Pagina di 44
 · 21 · English  
TROUBLESHOOTING
Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
È Connect the power plug to the outlet.
A function does not work when the button is 
pressed.
Is there static electricity in the air?
È Disconnect the power plug and connect it again.
Sound is not produced.
Is the Mute function on?
È  Press the VOL button to cancel the function.
Is the volume set to minimum?
È Adjust the Volume.
The remote control does not work.
Are the batteries drained?
È Replace with new batteries.
Is the distance between the remote control and 
Soundbar main unit too far?
È  Move the remote control closer to the Soundbar 
main unit.
The red LED on the subwoofer blinks and the 
subwoofer is not producing sound.
This issue can occur if the subwoofer is not 
connected to the Soundbar main unit.
È  Try to connect your subwoofer again. 
See page 6. 
The subwoofer drones and vibrates noticeably.
Try to adjust the vibration of your subwoofer.
È  Push the WOOFER button on your remote 
control  up or down to adjust its value (between 
-12, -6 ~ +6).
LICENCE
Manufactured under licence from Dolby 
Laboratories. Dolby, Dolby Atmos, Dolby Audio, 
Dolby Digital Plus, Pro Logic, and the double-D 
symbol are trademarks of Dolby Laboratories.
 
For DTS patents, see http://patents.dts.com. 
Manufactured under licence from DTS Licencing 
Limited. DTS, the Symbol, & DTS and the Symbol 
together are registered trademarks, and DTS 2.0 
Channel is a trademark of DTS, Inc. © DTS, Inc. 
All Rights Reserved.
The terms HDMI and HDMI High-Definition 
Multimedia Interface, and the HDMI Logo are 
trademarks or registered trademarks of HDMI 
Licencing LLC in the United States and other 
countries.