Samsung SL-C483W Manuale Utente

-

On-Forced: Set the Eco mode on with password. If a user wants 
to turn the Eco mode off, the user needs to enter the password.

 

If you set this mode to off, the Eco mode print job from the driver will not be 
calculated as a Eco mode nor will the Eco mode LED on the control be on.

 

•

Eco Features Configuration: You can set the default options for Eco 
mode.

-

Factory Default: You can keep the default settings.

-

Custom Settings: You can set printing from copy and PC driver 
print settings related settings. The settings you set here will be 
applied to all copy print and PC driver print jobs sent to the 
machine, unless the user disables Eco mode.

Press OK to save the change or 

(Back) to return to the previous 

screen.

You can change the initial settings when you first turn the machine on.

 

If you want to stop adjusting the initial settings, press Exit. The settings you 
have set so far will be saved. However, the Exit button is not enabled if it’s 
the first time using this option.

 

Press Machine Setup > Initial Settings from the display screen.

Press the language to use on the display screen and then press Next.

Read the note and then press Next.

 

If you want to reset the language, press 

(

)

 and select the language 

you want.

 

Press the Device Name field.

The pop up keyboard appears.

Remove the existing device name and enter the device name you want 
to use and then press OK. Then press Next.

Keep in mind to enter the device name to be used on the network.

 

•

If necessary, enter the location of the machine in the 

 field.

•

If necessary, enter the information in the 

 field for the 

person to contact when any problem occurs on the machine.

 

Press the Test button to verify the LAN connection. When Connected 
appears after pressing the Test button, press Next.

If Not connected appears, make sure that the machine is connected to 
the network then verify the LAN connection again.