Samsung MX-HS6800 Manuale Utente
Connecting a DVD or BD(Blu-ray) Player
Audio Connection
Connect the Digital Input (OPTICAL ) on your Hi-Fi component to the Digital Output of the DVD/BD player.
OR
Connect the Digital Input (COAXIAL) on your Hi-Fi component to the Digital Output of the BD/DVD player.
OR
Connect AUDIO IN (AUX IN) on your Hi-Fi component to the Audio Out of the DVD/BD player.
✎
NOTE
`
Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
`
If the cable/set-top box has only one audio output jack, connect it to either the right or left audio input jack
of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
COAXIAL
OUT
OPTICAL
OUT
AUDIO
OUT
DVD or BD Player
Getting Started
✎
NOTE
`
If you use an HDMI cable
(
not supplied)
t
o connect a Samsung TV to your Hi-Fi component , you
can operate the Hi-Fi component using the TV’s remote control. This function is available only in
connection with Samsung TV and DVD player supporting Anynet + (HDMI-CEC).
connection with Samsung TV and DVD player supporting Anynet + (HDMI-CEC).
`
Please check your TV for the Anynet+ (HDMI-CEC) logo. If your TV has an Anynet+ (HDMI-
CEC) logo, then it supports the Anynet+ function.
CEC) logo, then it supports the Anynet+ function.
`
When you are making Anynet+ connection, do not connect more than two Hi-Fi component s
(Anynet+ installed). Otherwise, it can cause a malfunction.
(Anynet+ installed). Otherwise, it can cause a malfunction.
`
To used Anynet+(HDMI-CEC) function,Hi-Fi component's Anynet+ mode must be turned on.
`
Press and hold Anynet+ button,turn Anynet+ on or turn Anynet+ off.
12
English
MX-HS6800-ZC-ENG-20150330.indd 12
2015/4/10 8:53:50