Samsung HMX-H400BP Manuale Utente

6

6

 

 

Using with a Windows computer

USING THE Intelli-studio PROGRAM

Intelli-studio is a built-in programmethat allows you to play back 

and edit files. You can upload files to web sites, such as YouTube 

or Flickr. For details, select “Help”  “Help” on the Intelli-studio 

screen.

Step 1. Connecting the USB cable

1

Set “USB Connect: Mass 

Storage” and “PC Software: 

On”. 

These are the default settings.

2

Connect the camcorder to a PC 

with the USB cable.

A new file saving window 

appears along with the Intelli-

studio main window. If your 

camcorder has no new files, the 

pop-up window for saving new 

files will not appear.

Depending on your version of Windows, the Windows 

removable disk window may also appear.

•

•

•

To disconnect the USB cable

To disconnect the USB cable after completing the file transfer, you 

must follow these steps:

1.  Click the “Safely Remove Hardware” icon on the taskbar.
.  Select “USB Mass Storage Device”, and then click “Stop”.
.  If the “Stop a Hardware device” window appears, click “OK”.
4.  Disconnect the USB cable from the camcorder and PC.

Use the provided USB cable. (Supplied by Samsung)

Make sure you insert the USB plug into the USB jack with the plug 

facing in the correct direction.

Use the AC power adaptor to power the camcorder when 

transferring fi les to your computer.

When the USB cable is connected, turning the camcorder on or off 

may cause the PC to malfunction.

If you disconnect the USB cable from the PC or the camcorder while 

transferring fi les, the data transmission will stop and the data may 

be damaged.

If you connect the camcorder to a PC via a USB HUB or 

simultaneously connect the camcorder along with other USB 

devices, the camcorder may not work properly. If this occurs, 

remove all USB devices from the PC, and then reconnect the 

camcorder.

Intelli-studio may not automatically run. If this occurs, access My 

Computer or Windows Explorer, open the drive that corresponds to 

your camcorder, fi nd Intelli-studio, and then run iStudio.exe.

•

•

•

•

•

•

•