Samsung HMX-U20RP Manuale Utente

troubleshooting

The recording stops automatically.

There is no more free space for recording on the storage media. 
Back up important files on your PC and format the storage media 
or delete unnecessary files.
If you use a memory card with a low writing speed, the camcorder 
automatically stops recording videos and the corresponding 
message appears on the LCD screen.

When recording a subject 
illuminated by bright light, vertical 
lines appear.

The camcorder is unable to record these levels of brightness.

When the screen is exposed to 
direct sunlight during recording, 
the screen turns red or black for an 
instant.

Do not leave the camcorder with the LCD screen exposed to direct 
sunlight.

The beep sound is not heard.

Set the "Beep Sound" to "On." 

page 55

The beep sound is temporally off while recording videos.
When the Audio/Video cable is connected to the camcorder, the 
beep sound automatically turns off.

There is a time difference between 
the point where you press 
Recording start/stop (

) button 

and the point where the recorded 
video starts/stops.

On your camcorder, there may be a slight time delay between the 
point when you press Recording start/stop (

) button and 

the actual point where the recorded video starts/stops. This is not 
an error.

You cannot record a photo

Set your camcorder to Record mode. 

page 20

Release the lock on the write-protection tab of the memory card if 
set.
The storage media is full. Use a new memory card or format the 
storage media. 

page 52  

Or delete unnecessary images. 

page 46