Samsung SCX-3205W Manuale Utente

Network setup (SCX-3205W(K) only)_ 32

For example, if your computer’s IP address is 192.168.1.150, 

enter 192.168.1.X (X is number between 1 and 254 other than 

the computer’s address).

•

Subnet Mask: Enter a Subnet Mask.

•

Default Gateway: Enter a Default Gateway.

6. Select Apply, then OK, and OK again. The printer will automatically 

print the configuration report. Confirm that all the settings are correct. 

Quit Safari. You may close and eject the installation CD-ROM. If 

necessary, restart the computer’s firewall. You have successfully 

changed the IP address, subnet mask, and gateway.

SetIP program should be automatically installed during the printer driver 

installation.
1. Print the machine’s network configuration report to find your 

machine’s MAC address. 

2. Open the /opt/Samsung/mfp/share/utils/.
3. Double-click the SetIPApplet.html file. 
4. Click to open the TCP/IP configuration window. 
5. Enter the network card’s MAC address, IP address, subnet mask, 

default gateway, and then click Apply. 

When you enter the MAC address, enter it without a colon(:).

6. The machine prints the network information. Confirm all the settings 

are correct. 

7. Close the SetIP program. 

You can also set up the various network settings through the network 

administration programs such as SyncThru™ Web Admin Service and 

SyncThru™ Web Service.

You may need to reset the machine to the factory default settings when 

machine that you are using is connected to new network environment.

1. Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example:

2. Click Go to access the SyncThru™ Web Service.
3. Click Login on the upper right of the website.

The Login window appears. 

4. Type in the ID and Password, and then click Login.

If it is your first time logging into SyncThru™ Web Service, type in 

the below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

5. Click Settings > Network Settings.
6. Click Restore Default on the left pane of the website.
7. Click Clear.
8. Click Yes when the confirmation window appears.
9. Click OK when the success window appears.
10. Turn off and restart machine to apply settings.

You can set up the machine driver, follow the steps below. 
This is recommended for most users. All components necessary for 

machine operations will be installed. 
1. Make sure that the machine is connected to the network or USB and 

powered on.

2. Insert the supplied software CD into your CD-ROM drive.

•

The software CD should automatically run and an installation window 

appears.

•

If the installation window does not appear, click Start and then Run. 

Type X:\Setup.exe, replacing “X” with the letter which represents 

your CD-ROM drive. Click OK.

•

If you use Windows Vista, Windows 7 or Windows 2008 Server R2 

click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents 

your CD-ROM drive and click OK.

•

If the AutoPlay window appears in Windows Vista, click Run 

Setup.exe in Install or run program field, and click Continue in the 

User Account Control windows.

•

If the AutoPlay window appears in Windows 7 or Windows 2008 

Server R2, click Run Setup.exe in Install or run program field, and 

click Yes in the User Account Control windows.

3. Select Install Now.

If necessary, select a language from the drop-down list.

•

For SCX-3205W(K), you can access Wireless Setting and 

Installation menu. The Wireless Setting and Installation 

allows you to install a wireless network to connect to the 

machine with a USB cable (See "Setting a wireless network 

•

The Advanced Installation has two options, Custom 

Installation and Install Software Only. The Custom 

Installation allows you to select the machine’s connection and 

choose individual component to install. The Install Software 

Only allows you to install the supplied software such as the 

Smart Panel. Follow the instruction on the window.

4. Read License Agreement, and select I accept the terms of the 

License Agreement. Then, click Next.
The program searches for the machine.

If your machine is not found in the network or locally, the error