Samsung MM-D330D Manuale Utente

English

Advanced Functions

To stop recording, press the

STOP (

 ) button

and then automatically create and save as the
MP3 file.

After the recording, a directory named



“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING”

will be created

in your device.

NOTE

✎

Do not disconnect the USB or the AC Cord during the



recording as this may cause file damage.

If you disconnected USB device during the recording,



the main unit will be power off and you may not delete
the recorded file, In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.

When the USB memory is not enough, it will be



displayed “NOT ENOUGH MEMORY”.

The recording works if the USB device or the HDD is



formatted in the FAT file system. (The NTFS file system
is not supported.)

When you use CD high speed search function, the CD



recording can’t work.

Sometimes, the recording time may be longer with



some USB devices. (See page 8)

When the CD recording, the EQ functions can not work



and automatically change to OFF.

When the CD recording, the REPEAT function can not



work and automatically changes to OFF.

You can not record the radio when searching or no



available frequencies in the Tuner mode.

Note that setting the input level too loud when



recording music from an external device through the
AUX and USB channel may introduce noise into the
recording. In that case, lower the external device’s
volume level.

Recording Speed

Each time you press and hold the

CD REC

SPEED button on the remote control, the
recording speed will change as follows:
RECORDSPD x 1

RECORDSPD x 3

While the Tuner or External Source is recording,



the recording speed does not supported.

When you select RECORDSPD x 3, the audio



sound will not be output.

MM-D330D-ENG-0207.indd 32

2011-3-16 18:08:35