Samsung 藍光播放器 BD-J5900 Manuale Utente

Pagina di 54
7.   Press the WPS(PBC) button on your 
router within two minutes. Your player 
automatically acquires all the network 
settings values it needs and connects 
to your network. 
The Network Status screen appears. 
The player connects to the network 
after the network connection is verified.
 
Ğ
WpS(pIN)
Before you begin, open the router's setup 
menu on your PC and access the screen 
with the WPS PIN entry field. 
1.   In the Home screen, select Settings, 
and then press the v button.
2.   Select Network, and then press the v 
button.
3.   Select Network Settings, and then 
press the v button.
4.   Select Wireless in the Network Settings 
screen, and then press the v button. 
The player searches for and then 
displays a list of the available networks.
5.   Select the desired network, and then 
press the ► button.
6.   Select the WpS(pIN), and then press 
the v button. The PIN pop-up 
appears.
7.   Enter the PIN into the WPS PIN entry 
field in the router's Set Up screen and 
then save the the screen.
 
NotES
 Contact the manufacturer of the router 
for instructions explaining how to access 
the route's Set Up screens or refer to the 
router's user's manual.
 For WPS connection, set your wireless 
router’s security encryption to AES. Setting 
to WEP security encryption does not support 
WPS connection.
Network test
Use this menu item to check whether your 
network connection is working or not.
Network Status
Use to check whether a connection to a 
network and the Internet has been established.
Wi-fi direct
The Wi-Fi Direct function allows you to 
connect Wi-Fi Direct devices to the player 
and each other using a peer-to-peer network, 
without a wireless router.
 
NotES
 Some Wi-Fi Direct devices may not support 
the DLNA function if connected via Wi-
Fi Direct. If this is the case, it is advisable 
to change the network connection method 
between devices.
 Bluetooth transmissions can interfere 
with the Wi-Fi Direct signal. Before you 
use the Wi-Fi Direct function, we strongly 
recommend that you turn off the Bluetooth 
function of any active mobile device.
1.   Turn on the Wi-Fi direct device and 
activate its Wi-Fi Direct function.
2.   In the Home screen, select Settings, and 
then press the v button.
3.   Select Network, and then press the v 
button.
4.   Select Wi-fi direct, and then press the 
v
 button.
The Wi-Fi Direct devices that you can 
connect appear.
5.   You have three ways to complete the Wi-
Fi connection:
•  Through the Wi-Fi device.
•  Through the player using PBC.
•  Through the player using a PIN.
  Each is covered below.
Through the Wi-Fi Device
1.   On the Wi-Fi device, follow the 
procedure on the device for connecting 
to another Wi-Fi Direct device. See the 
device's user manual for instructions.
2.   When you have completed the 
procedure, you should see a pop-up on 
your TV screen saying that a device that 
supports Wi-Fi Direct has requested to 
connect. Select oK, and then press the 
v
 button to accept.
3.   The Connecting pop-up appears, 
followed by the Connected pop-up. 
When it closes, you should see the 
device listed on the Wi-Fi Direct screen 
as connected.
Through the Player Using PBC
1.   Select the Wi-Fi Direct device you want 
to connect to this player, and then press 
the v button. The PBC/PIN pop up 
appears.
2.   Select pBC, and then press the v 
button. The PBC pop-up appears.
3.   Press the PBC button on the Wi-Fi Direct 
device within 2 minutes.
4.   The Connecting pop-up appears, 
followed by the Connected pop-up. When 
it closes, you should see the device listed 
on the Wi-Fi Direct screen as connected.
Through the Player Using a PIN
1.   Select the Wi-Fi Direct device you want 
to connect to this player, and then press 
the v button. The PBC/PIN pop up 
appears.
2.   Select pIN, and then press the v 
button. The PIN pop-up appears.
3.   Note the PIN code in the pop-up, and 
then enter it into the appropriate field 
in the Wi-Fi Direct device you want to 
connect.
4.   The Connecting pop-up appears, 
followed by the Connected pop-up. 
When it closes, you should see the 
device listed on the Wi-Fi Direct screen 
as connected.
15