Samsung UE37B6000 Manuale Utente

If you have any questions of TV, first refer to this list. If none of these troubleshooting tips apply, please visit ‘www.samsung.com’ site, then 

click on Support or contact Call Centre on list of last page.

Picture Quality

First of all, please perform the 

Picture Test to confirm that your TV is properly displaying test image.

Go to 

MENU - Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may caused by the source or signal.

●

TV image does not look as good as it 

did in the store.

If you have an analogue Cable/Set top box, upgrade to an Box. Use HDMI or 

Component cables to deliver HD picture quality.
Cable/Satellite subscriber : Try HD(High Definition) stations from channel line up.
Antenna connection: Try HD stations after performing Auto programme.

Many HD channels are upscaled from SD(Standard Definition) contents.

Adjust Cable/Set top box video output resolution to 1080i or 720p.
Confirm that you are watching the TV at the minimum distance recomended based on 

the size and definition of the signal you are displaying.

●

●
●

N

●
●

Picture is distorted : macroblock, small 

block, dots, pixelization

Compression of video contents may cause picture distortion especially on fast moving 

pictures such as sports and action movies.
Low signal level or bad quality can cause picture distortion. This is not a TV issue.

●

●

Wrong or missing colour with 

Component connection.

Make sure the Component cables are connected to the correct jacks. Incorrect or loose 

connections may cause colour problems or the screen will be blank.

●

Poor colour or brightness.

Adjust 

Picture options in the TV menu. (Picture mode, Colour, Brightness, 

Sharpness)
Adjust 

Energy Saving option in Setup menu.

Try picture reset to view the default picture setting. (Go to 

MENU - Picture - Picture 

Reset)

●

●
●

Dotted line on the edge of screen.

If picture size is set to 

Screen Fit, change to 16:.

Change cable/set top box resolution.

●
●

Picture is black and white with AV 

(Composite) input only.

Connect video cable(Yellow) to Green jack of component input 1 of the TV.

●

Picture freezes or is distorted when 

changing channels or picture is 

delayed.

If connected with cable box, please try to reset cable box. (reconnect AC cord and wait 

until cable box reboots. It may take up to 20 minutes.)
Set output resolution of cable box to 1080i or 720p.

●

●

Sound Quality

First of all, please perform the 

Sound Test to confirm that your TV audio is properly operating.

Go to 

MENU - Support - Self Diagnosis - Sound Test

If the audio is OK, the sound problem may caused by the source or signal.

●

No sound or sound is too low at 

maximum volume.

Please check the volume of external device connected to your TV then, adjust the TV 

volume accordingly.

●

Picture is good but no sound.

Set the 

Speaker Select option to TV speaker in the sound menu.

Make sure audio cables from an external device are connected to correct audio input 

jacks on the TV. 
Check connected device’s audio output option. (ex: You may need to change your 

cable box’ audio option to HDMI when you have HDMI connected to your TV.)
If you are using a DVI to HDMI cable, a separate audio cable is required.
Deactivate SRS function if you are setting the volume over 30 value.
Remove plug from headphone jack. (if available on your TV) 

●
●

●

●
●
●

Noise from speaker.

Check cable connections. Make sure a video cable is not connected to an audio input.
For Antenna/Cable connection, check signal strength. Low signal level may cause 

sound distortion.

●
●

¦

BN68-02388B-03L10.indb   48

2009-10-15   �� 2:10:34