Acer altos s300

25

Single CSM and TSM Configuration

This configuration can be cabled as either a Single (Joined) SCSI Bus or 
as a Dual (Split) SCSI Bus configuration.

Cabling the single (joined) SCSI bus configuration

One host cable is required for this configuration.  The length of the 
host cable may be a maximum of 25 meters in length.  When viewed 
from the rear there should be a CSM installed in one I/O slot and a TSM 
in the other.

Follow the procedures below to connect the cable (see figure below):

1.

Power off the enclosure and the host system.

2.

Attach one end of the cable to the connector on the CSM.

3.

Attach the other end of this cable to the host.

Note:  For information on the host connectors, refer to the 
documentation supplied with it.

1

2

1

2

0

I

0

I

To Host

ID 7

CSM

TSM

Mute

The CSM and TSM can be in either I/O slot of the enclosure.

SCSI ID Assignments shown from front of enclosure.