Acer altos s300
51
Installing and removing an advanced
cooling module (ACM)
cooling module (ACM)
The advanced cooling modules are located in the rear of the enclosure.
Follow these procedures to install and remove the advanced cooling
modules.
Follow these procedures to install and remove the advanced cooling
modules.
Warning! Fans continue to rotate after removal of power
from the ACM for approximately fifteen (15) seconds.
from the ACM for approximately fifteen (15) seconds.
Installing an advanced cooling module (ACM)
1.
Select the advanced cooling module slot into which the module is
to be installed.
to be installed.
2.
Orient the module, such that the LEDs are on the right.
3.
Gently slide the ACM into the empty ACM slot.
4.
Secure in place using the two fixing screws (torque setting 0.3Nm).
Removing an advanced cooling module (ACM)
1.
Loosen the two fixing screws.
2.
Using the advanced cooling module handle, gently slide it out of
the enclosure.
the enclosure.
Caution: Immediately replace the ACM after removal to
maintain correct airflow.
maintain correct airflow.
1
2
LEDs
Handle