Acer h9500 Manuale Utente

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions

are not supported under HDMI, DVI or Video mode.

Note: "HDMI Scan Info" function is only supported under HDMI mode.

Management

Frequency

"Frequency" changes the projector's refresh rate to match the

frequency of your computer’s graphics card. If you can see a vertical

flickering bar in the projected image, use this function to make the

necessary adjustments.

Tracking

Synchronizes the signal timing of the projector with the graphics card.

If you experience an unstable or flickering image, use this function to

correct it.

HDMI Scan Info

Adjust the overscan ratio of the HDMI image on screen.

•

Auto: Automatically adjust by information from player.

•

Underscan: Always no overscan on HDMI image.

•

Overscan: Always keep overscan on HDMI image.

ECO Mode

Choose "On" to dim the projector lamp which will lower power

consumption, extend the lamp life and reduce noise. Choose "Off"

to return normal mode.

High Altitude

Choose "On" to turn on High Altitude mode. Operate the fans at

full speed continuously to allow for proper high altitude cooling of

the projector.

Auto Shutdown

The projector will automatically shutdown when there is no signal

input after the allocated time. (in minutes)

Lamp Hour Elapse

Displays the lamp’s elapsed operating time (in hours).

Lamp Reminding

Activate this function to display a reminder to change the lamp 30

hours before its expected end-of-life.

Lamp Hour Reset

Press the

button and choose "Yes" to turn the lamp hour

counter to 0 hours.